Phase I study of peposertib and avelumab with or without palliative radiotherapy in patients with advanced solid tumors.

INTRODUCTION: We report results from a phase I, three-part, dose-escalation study of peposertib, a DNA-dependent protein kinase inhibitor, in combination with avelumab, an immune checkpoint inhibitor, with or without radiotherapy in patients with advanced solid tumors. MATERIALS AND METHODS: Peposertib 100-400 mg twice daily (b.i.d.) or 100-250 mg once daily (q.d.) was administered in combination with avelumab 800 mg every 2 weeks in Part A or avelumab plus radiotherapy (3 Gy/fraction × 10 days) in Part B. Part FE assessed the effect of food on the pharmacokinetics of peposertib plus avelumab. The primary endpoint in Parts A and B was dose-limiting toxicity (DLT). Secondary endpoints were safety, best overall response per RECIST version 1.1, and pharmacokinetics. The recommended phase II dose (RP2D) and maximum tolerated dose (MTD) were determined in Parts A and B. RESULTS: In Part A, peposertib doses administered were 100 mg (n = 4), 200 mg (n = 11), 250 mg (n = 4), 300 mg (n = 6), and 400 mg (n = 4) b.i.d. Of DLT-evaluable patients, one each had DLT at the 250-mg and 300-mg dose levels and three had DLT at the 400-mg b.i.d. dose level. In Part B, peposertib doses administered were 100 mg (n = 3), 150 mg (n = 3), 200 mg (n = 4), and 250 mg (n = 9) q.d.; no DLT was reported in evaluable patients. Peposertib 200 mg b.i.d. plus avelumab and peposertib 250 mg q.d. plus avelumab and radiotherapy were declared as the RP2D/MTD. No objective responses were observed in Part A or B; one patient had a partial response in Part FE. Peposertib exposure was generally dose proportional. CONCLUSIONS: Peposertib doses up to 200 mg b.i.d. in combination with avelumab and up to 250 mg q.d. in combination with avelumab and radiotherapy were tolerable in patients with advanced solid tumors; however, antitumor activity was limited. GOV IDENTIFIER: NCT03724890.

Demographic and clinical correlates of suicidal ideation in individuals with at-risk mental state (ARMS): A study from Pakistan.

BACKGROUND: Suicide is a major public health concern and one of the leading causes of mortality worldwide. People with an at-risk-mental-state (ARMS) for psychosis are more vulnerable to psychiatric co-morbidity and suicide, however, there are limited data from low-middle-income countries. The present study aimed to identify the prevalence of depressive symptoms and suicidal ideation along with sociodemographic and clinical correlates of suicidal ideation in individuals with ARMS from Pakistan. METHOD: Participants between the age of 16 and 35 years who met the criteria for ARMS based on the Comprehensive Assessment of At-Risk Mental State (CAARMS), were recruited from the community, general practitioner clinics and psychiatric units across Pakistan (n = 326). Montgomery and Asberg Depression Rating Scale (MADRS) and Social-Occupational-Functional-Assessment-Scale (SOFAS) were administered to participants. RESULTS: The prevalence of depressive symptoms and suicidal thoughts in the sample at baseline were 91.1% (n = 297) and 61.0% (n = 199), respectively. There were significant mean differences between groups (mean difference [95% CI]; p-value) without suicidal ideation and with suicidal ideation on measures of MADRS (-5.47 [-7.14, -3.81]; p < .001), CAARMS non-bizarre ideas (-0.29 [-0.47, -0.11]; p = .002) and perceptual abnormalities (-0.23 [-0.41, -0.04]; p = .015). CONCLUSION: These findings indicate that suicidal ideation and depressive symptoms are highly prevalent in individuals with ARMS in Pakistan. Given the pivotal developmental stages that ARMS presents, and the poor outcomes associated with co-morbid depression, there is an urgent need to prioritize the development of low-cost and scalable evidence-based interventions to address psychiatric comorbidity and suicidality in the ARMS population in Pakistan.

Corrigendum to "Cartesian Control of Sit-to-Stand Motion Using Head Position Feedback".

[This corrects the article DOI: 10.1155/2020/1979342.].

The impact of cow dung augmentation on soil restoration and bio-accumulation of metals (Lead and Cadmium) in Pheretima posthuma (Annelida: Clitellata) / O impacto do aumento de esterco de vaca na restauração do solo e bioacumulação de metais (chumbo e cádmio) em Pheretima posthuma (Annelida: Clitellata)

To investigate the role of cow dung in soil reclamation and bio assimilation along with bio accumulation of heavy metals in earthworm (P. posthuma) (N=900) earthworms were used and treatment groups of CD-soil mixture of different proportion of cow dung were designed. Nonlethal doses of lead acetate and cadmium chloride were added in treatment groups. Mature P. posthuma were released in each experimental pot maintaining the favorable conditions. The pH, carbon, nitrogen, phosphorus, exchangeable cations, and heavy metal level of each mixture was evaluated. The results indicated that bio-assimilation of Pb and Cd by P. posthuma were significantly (P ˂ 0.01) higher in different soil-CD treatments compared to control. Highest bio-assimilation of both metals was observed in T¹ of both groups (Pb = 563.8 mg/kg and Cd = 42.95 mg/kg). The contents of both metals were significantly (P ˂ 0.05) lowered in casting. The nutrient concentration in the final castings of all soil-CD treatments were also equally transformed from less or insoluble to more soluble and available for plants, except for carbon level which increased with CD proportion. It is concluded that cow dung as organic matter has a positive effect on soil reclamation and bio-assimilation of metals by P. posthuma.

Para investigar o papel do esterco de vaca na recuperação do solo e bioassimilação, juntamente com a bioacumulação de metais pesados em minhocas (P. posthuma) (N = 900), minhocas foram usadas e grupos de tratamento de mistura CD-solo de diferentes proporções de esterco de vaca foram projetados. Doses não letais de acetato de chumbo e cloreto de cádmio foram adicionadas aos grupos de tratamento. P. posthuma maduros foram liberados em cada vaso experimental, mantendo as condições favoráveis. Foram avaliados o pH, carbono, nitrogênio, fósforo, cátions trocáveis e nível de metais pesados de cada mistura. Os resultados indicaram que a bioassimilação de Pb e Cd por P. posthuma foi significativamente (P ˂ 0,01) maior em diferentes tratamentos de solo-CD em relação ao controle. A maior bioassimilação de ambos os metais foi observada em T1 de ambos os grupos (Pb = 563,8 mg / kg e Cd = 42,95 mg / kg). O conteúdo de ambos os metais foi significativamente (P ˂ 0,05) reduzido na fundição. A concentração de nutrientes nas fundições finais de todos os tratamentos de solo-CD também foi igualmente transformada de menos ou insolúvel para mais solúvel e disponível para as plantas, exceto o nível de carbono que aumenta com a proporção de CD. Conclui-se que o esterco de vaca como matéria orgânica tem um efeito positivo na recuperação do solo e na bioassimilação de metais por P. posthuma.

The impact of cow dung augmentation on soil restoration and bio-accumulation of metals (Lead and Cadmium) in Pheretima posthuma (Annelida: Clitellata)

Abstract To investigate the role of cow dung in soil reclamation and bio assimilation along with bio accumulation of heavy metals in earthworm (P. posthuma) (N=900) earthworms were used and treatment groups of CD-soil mixture of different proportion of cow dung were designed. Nonlethal doses of lead acetate and cadmium chloride were added in treatment groups. Mature P. posthuma were released in each experimental pot maintaining the favorable conditions. The pH, carbon, nitrogen, phosphorus, exchangeable cations, and heavy metal level of each mixture was evaluated. The results indicated that bio-assimilation of Pb and Cd by P. posthuma were significantly (P 0.01) higher in different soil-CD treatments compared to control. Highest bio-assimilation of both metals was observed in T1 of both groups (Pb = 563.8 mg/kg and Cd = 42.95 mg/kg). The contents of both metals were significantly (P 0.05) lowered in casting. The nutrient concentration in the final castings of all soil-CD treatments were also equally transformed from less or insoluble to more soluble and available for plants, except for carbon level which increased with CD proportion. It is concluded that cow dung as organic matter has a positive effect on soil reclamation and bio-assimilation of metals by P. posthuma.

RESUMO Para investigar o papel do esterco de vaca na recuperação do solo e bioassimilação, juntamente com a bioacumulação de metais pesados em minhocas (P. posthuma) (N = 900), minhocas foram usadas e grupos de tratamento de mistura CD-solo de diferentes proporções de esterco de vaca foram projetados. Doses não letais de acetato de chumbo e cloreto de cádmio foram adicionadas aos grupos de tratamento. P. posthuma maduros foram liberados em cada vaso experimental, mantendo as condições favoráveis. Foram avaliados o pH, carbono, nitrogênio, fósforo, cátions trocáveis e nível de metais pesados de cada mistura. Os resultados indicaram que a bioassimilação de Pb e Cd por P. posthuma foi significativamente (P 0,01) maior em diferentes tratamentos de solo-CD em relação ao controle. A maior bioassimilação de ambos os metais foi observada em T1 de ambos os grupos (Pb = 563,8 mg / kg e Cd = 42,95 mg / kg). O conteúdo de ambos os metais foi significativamente (P 0,05) reduzido na fundição. A concentração de nutrientes nas fundições finais de todos os tratamentos de solo-CD também foi igualmente transformada de menos ou insolúvel para mais solúvel e disponível para as plantas, exceto o nível de carbono que aumenta com a proporção de CD. Conclui-se que o esterco de vaca como matéria orgânica tem um efeito positivo na recuperação do solo e na bioassimilação de metais por P. posthuma.

The impact of cow dung augmentation on soil restoration and bio-accumulation of metals (Lead and Cadmium) in Pheretima posthuma (Annelida: Clitellata) / O impacto do aumento de esterco de vaca na restauração do solo e bioacumulação de metais (chumbo e cádmio) em Pheretima posthuma (Annelida: Clitellata)

Abstract To investigate the role of cow dung in soil reclamation and bio assimilation along with bio accumulation of heavy metals in earthworm (P. posthuma) (N=900) earthworms were used and treatment groups of CD-soil mixture of different proportion of cow dung were designed. Nonlethal doses of lead acetate and cadmium chloride were added in treatment groups. Mature P. posthuma were released in each experimental pot maintaining the favorable conditions. The pH, carbon, nitrogen, phosphorus, exchangeable cations, and heavy metal level of each mixture was evaluated. The results indicated that bio-assimilation of Pb and Cd by P. posthuma were significantly (P ˂ 0.01) higher in different soil-CD treatments compared to control. Highest bio-assimilation of both metals was observed in T1 of both groups (Pb = 563.8 mg/kg and Cd = 42.95 mg/kg). The contents of both metals were significantly (P ˂ 0.05) lowered in casting. The nutrient concentration in the final castings of all soil-CD treatments were also equally transformed from less or insoluble to more soluble and available for plants, except for carbon level which increased with CD proportion. It is concluded that cow dung as organic matter has a positive effect on soil reclamation and bio-assimilation of metals by P. posthuma.

RESUMO Para investigar o papel do esterco de vaca na recuperação do solo e bioassimilação, juntamente com a bioacumulação de metais pesados ​​em minhocas (P. posthuma) (N = 900), minhocas foram usadas e grupos de tratamento de mistura CD-solo de diferentes proporções de esterco de vaca foram projetados. Doses não letais de acetato de chumbo e cloreto de cádmio foram adicionadas aos grupos de tratamento. P. posthuma maduros foram liberados em cada vaso experimental, mantendo as condições favoráveis. Foram avaliados o pH, carbono, nitrogênio, fósforo, cátions trocáveis ​​e nível de metais pesados ​​de cada mistura. Os resultados indicaram que a bioassimilação de Pb e Cd por P. posthuma foi significativamente (P ˂ 0,01) maior em diferentes tratamentos de solo-CD em relação ao controle. A maior bioassimilação de ambos os metais foi observada em T1 de ambos os grupos (Pb = 563,8 mg / kg e Cd = 42,95 mg / kg). O conteúdo de ambos os metais foi significativamente (P ˂ 0,05) reduzido na fundição. A concentração de nutrientes nas fundições finais de todos os tratamentos de solo-CD também foi igualmente transformada de menos ou insolúvel para mais solúvel e disponível para as plantas, exceto o nível de carbono que aumenta com a proporção de CD. Conclui-se que o esterco de vaca como matéria orgânica tem um efeito positivo na recuperação do solo e na bioassimilação de metais por P. posthuma.

Sero-epidemiology and risk factor analysis of human brucellosis in Punjab, Pakistan: a cross sectional study.

Human brucellosis is a neglected zoonotic problem worldwide with a high degree of morbidity in humans and is mostly overlooked due to other febrile conditions. The aim of this study was to evaluate the sero-prevalence and risk factors of human brucellosis among subjects living in Punjab, Pakistan. In this cross-sectional study, human blood samples were collected from seven districts of Punjab, Pakistan. Information regarding personal data, demographic data and potential risk factors was collected through a structured questionnaire. Detection of anti-Brucella antibodies was done through Rose Bengal Plate Test (RBPT) and Enzyme Linked Immunosorbent Assay (ELISA). Descriptive analysis, Chi square test and Odds ratio was applied using STATA software version 12. The sero-prevalence of human brucellosis was 13.13% with significantly higher percentage in males 17.23% and age group 25-40 years 16.50% (P=< 0.001). The demographic factors positively associated with human brucellosis were lack of education (P = 0.003; OR = 1.85) and farming as an occupation (P =<0.001; OR = 2.50) Similarly, among the risk factors studied, keeping animals at home (P =<0.001; OR = 2.03), slaughtering of animals (P =<0.001; OR = 15.87) and consuming raw milk (P =<0.001; OR = 5.42) were the factors strongly connected with human brucellosis. A massive awareness should be given to livestock farmers and individuals directly linked to animals regarding risk factors and transmission of brucellosis. Consumption of unpasteurized milk and its products should be condemned to curtail this neglected disease.

The impact of cow dung augmentation on soil restoration and bio-accumulation of metals (Lead and Cadmium) in Pheretima posthuma (Annelida: Clitellata).

To investigate the role of cow dung in soil reclamation and bio assimilation along with bio accumulation of heavy metals in earthworm (P. posthuma) (N=900) earthworms were used and treatment groups of CD-soil mixture of different proportion of cow dung were designed. Nonlethal doses of lead acetate and cadmium chloride were added in treatment groups. Mature P. posthuma were released in each experimental pot maintaining the favorable conditions. The pH, carbon, nitrogen, phosphorus, exchangeable cations, and heavy metal level of each mixture was evaluated. The results indicated that bio-assimilation of Pb and Cd by P. posthuma were significantly (P ˂ 0.01) higher in different soil-CD treatments compared to control. Highest bio-assimilation of both metals was observed in T1 of both groups (Pb = 563.8 mg/kg and Cd = 42.95 mg/kg). The contents of both metals were significantly (P ˂ 0.05) lowered in casting. The nutrient concentration in the final castings of all soil-CD treatments were also equally transformed from less or insoluble to more soluble and available for plants, except for carbon level which increased with CD proportion. It is concluded that cow dung as organic matter has a positive effect on soil reclamation and bio-assimilation of metals by P. posthuma.

Effect of Cu Ions Implantation on Structural, Electronic, Optical and Dielectric Properties of Polymethyl Methacrylate (PMMA).

In this work, the effect of ion bombardment on the optical properties of Polymethylmethacrylate (PMMA) was studied. Polymer samples were implanted with 500 keV Cu+ ions with a fluence ranging from 1 × 1012 to 1 × 1014 ions/cm2. X-ray Diffractometer (XRD) study indicated a relatively lower variation with a higher dose of ions. Fourier Transform Infrared (FTIR) spectra exhibited that with the implantation of Cu ions the intensity of existing bands decreases, while the result confirms the existence of a C=C group. The pristine and ion-implanted samples were also investigated using photoluminescence (PL) and Ultra Violet-Visible (UV-VIS) spectra. The optical band gap (Eg) was observed up to 3.05 eV for the implanted samples, while the pristine sample exhibited a wide energy-gap up to ~3.9 eV. The change in the optical gap indicated the presence of a gradual phase transition for the polymer blends. The dielectric measurements of the pristine and Cu-implanted PMMA were investigated in the 10 Hz to 2 GHz frequency range. It was found that the implanted samples showed a significant decrease in the value of the dielectric constant. The value of the dielectric constant and dielectric loss of the PMMA and Cu-implanted samples at a 1-kHz frequency were found to be ~300 and 29, respectively. The modification of the PMMA energy bandgap in the current research suggested the potential use of Cu implanted PMMA in the field of optical communications and flexible electronic devices.

Sero-epidemiology and risk factor analysis of human brucellosis in Punjab, Pakistan: a cross sectional study

@#Human brucellosis is a neglected zoonotic problem worldwide with a high degree of morbidity in humans and is mostly overlooked due to other febrile conditions. The aim of this study was to evaluate the sero-prevalence and risk factors of human brucellosis among subjects living in Punjab, Pakistan. In this cross-sectional study, human blood samples were collected from seven districts of Punjab, Pakistan. Information regarding personal data, demographic data and potential risk factors was collected through a structured questionnaire. Detection of anti-Brucella antibodies was done through Rose Bengal Plate Test (RBPT) and Enzyme Linked Immunosorbent Assay (ELISA). Descriptive analysis, Chi square test and Odds ratio was applied using STATA software version 12. The sero-prevalence of human brucellosis was 13.13% with significantly higher percentage in males 17.23% and age group 25-40 years 16.50% (P=< 0.001). The demographic factors positively associated with human brucellosis were lack of education (P = 0.003; OR = 1.85) and farming as an occupation (P =<0.001; OR = 2.50) Similarly, among the risk factors studied, keeping animals at home (P =<0.001; OR = 2.03), slaughtering of animals (P =<0.001; OR = 15.87) and consuming raw milk (P =<0.001; OR = 5.42) were the factors strongly connected with human brucellosis. A massive awareness should be given to livestock farmers and individuals directly linked to animals regarding risk factors and transmission of brucellosis. Consumption of unpasteurized milk and its products should be condemned to curtail this neglected disease.

Trapezius or facial muscles: Which one is more suitable for the measurement of stress using sEMG signals?

A number of techniques have been reported to detect mental stress. Surface Electromyography (sEMG) has also been used to measure stress by acquiring the signals from various sites of the human body, however, consensus need to be established to determine the best possible site to harvest stress related information. In this study, work related mental stress using sEMG signals acquired from trapezius muscle and facial muscles were compared. BIOPAC signal acquisition system was used to acquire sEMG signals simultaneously from both trapezius and facial muscles from forty five (45) healthy volunteers. Stress was induced using different standard methods in a controlled environment. Statistical significant difference was found between the stress and rest levels of sEMG signals. The statistical test also showed that the upper trapezius muscle was a better stress detection site as compared to facial muscles.Clinical Relevance- Optimized stress detection can help in the prevention of the possible stress related physical disorders.

Cartesian Control of Sit-to-Stand Motion Using Head Position Feedback.

Sit-to-stand (STS) motion is an indicator of an individual's physical independence and well-being. Determination of various variables that contribute to the execution and control of STS motion is an active area of research. In this study, we evaluate the clinical hypothesis that besides numerous other factors, the central nervous system (CNS) controls STS motion by tracking a prelearned head position trajectory. Motivated by the evidence for a task-oriented encoding of motion by the CNS, we adopt a robotic approach for the synthesis of STS motion and propose this scheme as a solution to this hypothesis. We propose an analytical biomechanical human CNS modeling framework where the head position trajectory defines the high-level task control variable. The motion control is divided into low-level task generation and motor execution phases. We model CNS as STS controller and its Estimator subsystem plans joint trajectories to perform the low-level task. The motor execution is done through the Cartesian controller subsystem that generates torque commands to the joints. We do extensive motion and force capture experiments on human subjects to validate our analytical modeling scheme. We first scale our biomechanical model to match the anthropometry of the subjects. We do dynamic motion reconstruction through the control of simulated custom human CNS models to follow the captured head position trajectories in real time. We perform kinematic and kinetic analyses and comparison of experimental and simulated motions. For head position trajectories, root mean square (RMS) errors are 0.0118 m in horizontal and 0.0315 m in vertical directions. Errors in angle estimates are 0.55 rad, 0.93 rad, 0.59 rad, and 0.0442 rad for ankle, knee, hip, and head orientation, respectively. RMS error of ground reaction force (GRF) is 50.26 N, and the correlation between ground reaction torque and the support moment is 0.72. Low errors in our results validate (1) the reliability of motion/force capture methods and anthropometric technique for customization of human models and (2) high-level task control framework and human CNS modeling as a solution to the hypothesis. Accurate modeling and detailed understanding of human motion can have significant scope in the fields of rehabilitation, humanoid robotics, and virtual characters' motion planning based on high-level task control schemes.

Electron number density conservation model combined with a self-absorption correction methodology for analysis of nanostructure plasma using laser-induced breakdown spectroscopy.

We studied laser ablation and plasma property evolution for a nickel (Ni) doped tin (Sn) oxide nanostructures target using laser-induced breakdown spectroscopy (LIBS). The transition metal Ni doped tin oxide nanostructures were synthesized by co-precipitation and hydrothermal methodologies. The size of prepared nanoparticles was verified by X-ray diffraction and transmission electron microscopy techniques. A frequency-doubled pulsed Nd:YAG laser with a wavelength of 532 nm was used to produce ablated plasma nanostructures. Ablation of doped and undoped nanostructures revealed salient-enhanced spectral emissions compared with their bulky counterparts. The emission lines of the constituent elements of doped material were used to find plasma parameters. The plasma temperature was estimated from a Boltzmann plot, and the electron number density was determined from the Saha-Boltzmann equation. The self-absorption effect has been observed in tiny plasma of nanostructures. The affected profiles of spectral lines of Ni and Sn nanoparticles due to self-absorption in LIBS spectra were corrected by the internal reference self-absorption correction (IRSAC) methodology. After correction of emitted line intensities by IRSAC, the electron number density (END) conservation approach was applied for quantitative analysis of doped nanostructures. In the END conservation approach, quantitative analysis of samples was carried out using electron number densities. Quantitative results derived from the END conservation approach at high and low concentrations exhibited good correlation when these were compared and validated with results from a conventional calibration free approach and the standard recognized energy dispersive X-ray technique.

Three-Dimensional-Ordered Porous Nanostructures for Lithium-Sulfur Battery Anodes and Cathodes Confer Superior Energy Storage Performance.

The nonuniformity of microscopic electrochemical reaction of electrodes essentially results in the partial reaction discrepancy and subsequent partial overheating, which is the most critical safety problem of the battery system in electric vehicles. Herein, we report a class of DLPC@S/DLPC@Li full cell based on a distinctly constructed double-layer photonic crystal (DLPC) with a three-dimensional-ordered interconnected structure. This full cell not only ensures the uniformity of microscopic electrochemical reaction but also solves common problems such as low conductivity of sulfur, poor cycle life, and lithium dendrite growth. Impressively, the full cell exhibits superior electrochemical performance pertaining to high reversible capacity of 703.3 mAh g-1 even at an extremely high rate of 10 C and excellent cycle performance with 1200 cycles with about 0.0317% capacity loss per cycle at 0.5 C.

Dietary intake in people consuming a low-carbohydrate diet in the UK Biobank.

BACKGROUND: Low-carbohydrate diets are becoming increasingly popular, although their dietary quality outside of clinical studies is unknown. A previous study analysed the dietary intake in people consuming a reduced-carbohydrate diet (<40% calories). However, it is not clear what foods people consume when carbohydrate is reduced to below 26% of total calories. METHODS: In the present cross-sectional study, the dietary and nutrient intake collected via up to five consecutive 24-h dietary recalls and a food frequency questionnaire of 444 individuals (aged 46-79 years) consuming <26% of calories from carbohydrate (LCHO) was compared with that of 131 897 individuals consuming ≥45% calories from carbohydrate (NCHO) using the UK Biobank Dataset. Absolute cut-offs to define the low-carbohydrate group (<130 g day-1 ; n = 1953 versus ≥225 g day-1 , n = 113 036) were also used. RESULTS: Both NCHO (>45% calories and ≥225 g) groups consumed significantly more high-sugar, high-fat snacks [median 6.0, interquartile range (IQR) = 2.0-11.0 and median 6.0, IQR = 3.0-11.8, respectively) compared to the LCHO (<26% calories and <130 g) groups (median 0, IQR = 0-2.8 and median 1, IQR = 0-3.8, respectively) (P < 0.0001). Both LCHO groups reported consuming significantly more red meat, oily fish, nuts and seeds but fewer fruits, vegetables and pulses compared to the NCHO groups. In general, the consumption of oily fish, nuts, seeds and pulses was low across the whole cohort and differences in intake between the LCHO and NCHO groups were small. After adjusting for socio-economic status, most differences remained. CONCLUSIONS: Carbohydrate restriction is associated with both beneficial and potentially deleterious dietary changes compared to a normal carbohydrate intake.

Towards sensor array materials: can failure be delayed?

Further to prior development in enhancing structural health using smart materials, an innovative class of materials characterized by the ability to feel senses like humans, i.e. 'nervous materials', is discussed. Designed at all scales, these materials will enhance personnel and public safety, and secure greater reliability of products. Materials may fail suddenly, but any system wishes that failure is known in good time and delayed until safe conditions are reached. Nervous materials are expected to be the solution to this statement. This new class of materials is based on the novel concept of materials capable of feeling multiple structural and external stimuli, e.g. stress, force, pressure and temperature, while feeding information back to a controller for appropriate real-time action. The strain-stress state is developed in real time with the identified and characterized source of stimulus, with optimized time response to retrieve initial specified conditions, e.g. shape and strength. Sensors are volumetrically embedded and distributed, emulating the human nervous system. Immediate applications are in aircraft, cars, nuclear energy and robotics. Such materials will reduce maintenance costs, detect initial failures and delay them with self-healing. This article reviews the common aspects and challenges surrounding this new class of materials with types of sensors to be embedded seamlessly or inherently, including appropriate embedding manufacturing techniques with modeling and simulation methods.

Photoplethysmographic signals and blood oxygen saturation values during artificial hypothermia in healthy volunteers.

Pulse oximetry utilizes the technique of photoplethysmography to estimate arterial oxygen saturation (SpO(2)) values. During hypothermia, the amplitude of the photoplethysmograph (PPG) is compromised which can lead to inaccurate estimation of SpO(2). A new mutlimode PPG/pulse oximeter sensor was developed to investigate the behaviour of PPGs during conditions of induced hypothermia (hand immersed in an ice bath). PPG measurements from 20 volunteers were conducted and SpO(2) values were estimated at all stages of the experiment. Good quality PPG signals were observed from the majority of the volunteers at almost all hand temperatures. At low temperature ranges, from 13 to 21 °C, the failure rate to estimate SpO(2) values from the multimode transreflectance PPG sensor was 2.4% as compared to the commercial pulse oximeter with a failure rate of 70%.

Investigation of photoplethysmographic signals and blood oxygen saturation values on healthy volunteers during cuff-induced hypoperfusion using a multimode PPG/SpO2 sensor.

Photoplethysmography (PPG) is a technique widely used to monitor volumetric blood changes induced by cardiac pulsations. Pulse oximetry uses the technique of PPG to estimate arterial oxygen saturation values (SpO2). In poorly perfused tissues, SpO2 readings may be compromised due to the poor quality of the PPG signals. A multimode finger PPG probe that operates simultaneously in reflectance, transmittance and a combined mode called "transreflectance" was developed, in an effort to improve the quality of the PPG signals in states of hypoperfusion. Experiments on 20 volunteers were conducted to evaluate the performance of the multimode PPG sensor and compare the results with a commercial transmittance pulse oximeter. A brachial blood pressure cuff was used to induce artificial hypoperfusion. Results showed that the amplitude of the transreflectance AC PPG signals were significantly different (p < 0.05) than the AC PPG signals obtained from the other two conventional PPG sensors (reflectance and transmittance). At induced brachial pressures between 90 and 135 mmHg, the reflectance finger pulse oximeter failed 25 times (failure rate 42.2 %) to estimate SpO2 values, whereas the transmittance pulse oximeter failed 8 times (failure rate 15.5 %). The transreflectance pulse oximeter failed only 3 times (failure rate 6.8 %) and the commercial pulse oximeter failed 17 times (failure rate 29.4 %).

Investigation of pulse oximeter failure rates during artificial hypoperfusion utilising a custom made multimode pulse oximetery sensor.

Pulse oximetry utilises the technique of photoplethysmography (PPG) to estimate arterial oxygen saturation values (SpO2). In poorly perfused tissues, SpO2 readings may be compromised due to the poor quality of the PPG signals. In order to investigate further the threshold where pulse oximetry fails to produce accurate SpO2 values, we have developed a custom made multimode finger pulse oximetry probe that operates in conventional, reflectance and transmittance mode independently and also in a combined mode called transreflectance. Experiments on twenty healthy volunteers undergoing induced artificial hypoperfusion utilising a brachial blood pressure cuff were performed in order to investigate the possible threshold of failure to accurately estimate SpO2 values from all pulse oximetry modes. The results suggest that the transreflectance pulse oximeter endures more in estimating accurately SpO2 values when compared with the other two custom made pulse oximeters and a commercial finger pulse oximeter.